This “recent” communication network dedicated to navigation improves data rate between the instruments and offers a significant higher flexibility of installation than NMEA 0183<\/strong>. Physically, the network is connected to a cable or a primary junction box on which display units and marine sensors are connected thanks to standard wired plugs. Thus, each display unit becomes multifunction. It shows data from all the sensors whatever its position on the “backbone” of the network.<\/p>\n \u00a0 NMEA 2000<\/strong> standard has a language different from NMEA 0183<\/strong> standard which is still mainly used on yachts. To keep dialogue between devices using different standards on the same network, manufacturers provide adapters to convert to NMEA 2000<\/strong> standard.<\/p>\n Data read and sent by ADRENA are in NMEA 0183<\/strong> standard. Thus, it is necessary to use a NMEA 2000 to NMEA 0183 converter<\/strong> connected to the laptop. \u00a0Specialized manufacturers like Actisense\u00a0 (NGW-1)\u00a0or \u00a0Vespermarine<\/a> provide several models. Vespermarine provide an all-in-one box which is at the same time an AIS receiver\/transponder, a WIFI\/USB router and a NMEA 2000\/NMEA 0183 converter<\/strong>.<\/p>\n \u00a0 Converted data are currently restricted: position, boat speed and wind direction are provided but it is not the case for waypoints and performances data. For the same reasons, data sent by ADRENA will not be read on a CPU that is not performance-oriented. Thus, it is recommended to consult the conversion table of each manufacturer before any purchase.<\/p>\n Raymarine plotters bigger than 7″ include an input\/output NMEA 0183<\/strong> in addition to the NMEA 2000<\/strong> “Seatalk NG” network.<\/p>\n For other NMEA 2000 devices, it will be necessary to use an Actisense converter.<\/p>\n <\/p>\n New Garmin CPUs provide an input NMEA 0183<\/strong> via an external box as well as a NMEA 2000<\/strong> to FDX converter. Indeed, Nexus belonging to the manufacturer Garmin, it provides a box (GND10) to translate the FDX performance protocol used by Adrena with the Nexus NXR CPUs.<\/p>\n \u00a0 Zeus and Triton ranges also work in NMEA 2000<\/strong> on the brand owner network “Simnet”. In addition to input NMEA 0183<\/strong> that can be found on some plotters, NMEA 2000<\/strong> to NMEA 0183<\/strong> “AT10” converter is available in option.<\/p>\n \u00a0![\"bg-network\"](\"https:\/\/www.adrena-software.com\/wp-content\/uploads\/2015\/03\/ACTUALITES_2015_bg-network.jpg\")
<\/a><\/p>\n<\/a><\/p>\nRaymarine<\/strong><\/h3>\n
<\/a><\/h2>\nGarmin<\/strong><\/h3>\n
<\/a><\/p>\nB&G and Simrad<\/strong><\/h3>\n
<\/a><\/p>\n